Seite
3
von
12
KIOTO_Installation_manual_2021 © KIOTO Photovoltaics GmbH, Solarstraße 1, 9300 Sankt Veit/Glan - Österreich 06/2021
Please read these installation instructions carefully before installing the photovoltaic modules.
The non
– observance could lead to damage to persons and / or goods. Further the guarantee
and the product warranty could expire. The installation of photovoltaic modules requires
technical knowledge; therefore, this must be done by skilled and qualified persons!
The general handling of the product, the using and the exact installation are beyond the
control area of KIOTO Photovoltaics GmbH. Therefore, KIOTO cannot take responsibility for
any damage, loss or cost which is caused by inappropriate installation, inappropriate handling
of the product or wrong use!
General module handling
Do not open or demount the module.
Do not remove any parts from the module.
Do not remove or damage any product markings.
Do not stand or step on a module to prevent the risk of injury and damage to the module.
Do not drop the module.
Avoid any form of external force exposure.
Do not expose the module, especially the module backside to any lacquer, paint, glue,
chemicals or other abrasive liquids.
Do not handle the module at the junction box.
Do not pull the module connection cables by forces.
Do not drill any holes in the framework or other components of the module.
Do not interfere with the internal electrical connection of the module. Contact your photovoltaic
retailer if problems occur.
Please consider the maximum system voltage.
Never align simulated sunlight on the module or parts of the module.
Observe the mounting and installation instructions of other used components.
Prior to the installation of the modules, please contact the appropriate authorities to determine
the necessary requirements regarding installation, approval and inspection.
Product marking, product label
The product label is placed on the backside of the module and contains all required important
electrical and product specific values. The information on the label relates to EN 50380:2003
and Standard Test Conditions (1000W/m² - 25°C
– AM 1,5).
Electrical and mechanical characteristics can be taken from the current data sheets. These
are available in the download area at
The product label must not be damaged or removed
– otherwise the guarantee and product
warranty will be invalidated!
Technical data
Module series:
KPV ME NEC
– 320/325/330/340/380Wp
KPV GME/GML (framed/unframed) NEC
– 310/360Wp
These modules are configured for use in DC systems.