HERMONIA
HUMIDIFIER
User Manual
Article-Nr. 40500401
PRODUCT STRUCTURES
Note
: The accessories in the package are exclusive-
ly used for the product. The appearance and quan-
tity may be different for different batches. Please
refer to the auctual delivery
INSTRUCTIONS FOR USE
After power on, press the power button with a beep,
and start with the default function after a beep:
1.
Atomization degree: high
2.
Timing: 3h
3.
Light brightness: large
4.
Lighting effect: full bright
When there is no wawter: 3 beeps, within 2s, then it
will automatically shut down.
When the time is up: A long “beep” sound, and then
automatically shut down.
There will be a abeep every time you press a key.
Nebulizer failure: The LED flashes quickly for 2s,
then a long “beep”, and then automatically shuts
down.
Fan failure: The LED flashes quickly for 2s, then a
long “beep” sound, and then automatically shuts
down.
TROUBLESHOOTING
1.
Remote control
2.
Shell
3.
Light
4.
Top cover
5.
Water tank
Technical Specifications
Power:............................................................... 10 W
Dimensions:.................................. 20 x 80 x 12.5 cm
Weight:............................................................ 500 g
Atomization amount:.......................... 15–25 ml/h
Water tank capacity:...................................... 20 ml
1
2
3
4
5
SAVETY PRECAUTIONS
If it is the first time to use, please remove the insu-
lating sheet on the remote control.
If you need to add water, the remote control needs
to be unplugged from the housing before the hous-
ing can be opened.
Open the shell and prepare to add water.
Teh water filling position needs to be filled accord-
ing to the designated position.
The maximum water volume is 200 ml, or it cannot
exceed the indication line of the maximum water
level, otherwise it will affect the atomization effect
or cause water leakage and cause damage to the
machine.
Plug in the supplied power cord, Type-C, 2A. If you
use an alternative power cord, you must pay atten-
tion to the current specification of 1A, otherwise it
will affect the atomization efect.
Pay attention to the selected distributor, its output
current cannot be lower than DC5V 1.5 A, otherwise
it will affect the atomization effect.
Use the remote control to turn on the atomizer, and
then select the desired function and effect.
The atomizer has a memory memory function. If
the power is not completely removed, the atmizer
will record the last used function set. If it needs to
be reset, the power cord must be completely un-
plugged.
After use, you must pour out the remaining water in
the water tank, so tht your atomizer an achieve the
best maintenance effect.
note that pouring water needs to follow the in-
structions, otherwise it will damage the atomizer.
Please use pure water, so that your atomizer will
not be damaged due to impurities in the water, so
as to achieve the best mainenance effect.
Do not place on unsafe or delicate surfaces.
Keep sensitive electronic devices away.
Descale the appliance with care.
Power on / Power off
High (violent flame effect)
Low (soft flame effect)
1 h (light yellow light)
3 h (default: yellow light)
6 h (dark yellow light)
Light brightness
large / medium / small / off
Lighting effect
full / breathing / flashing
FUNCTION SELECTION
Note:
If the above methods cannot be improved,
please consult the customer service hotline and
contact a professional for repair.
SYMPTOM
POSSIBLE CAUSES
APPROACH
Press the power, the power-on indicator does not
light up, and the hunidifier cannot be startet
Improper connection of the adaper
Connect the cable and press the switch button
again
The indicator light on the switch is on, the small
fan rotates, and there is no fog
The water tank is short of water or too little water
Add purified water
The humidifier emits a peculiar smell
There is scale in the water tank, the added water
has impurities, or the water is left for too long
Remove the lid of the water tank and place it in
a cool place or more than 12 hours to ventilate,
clean the water tank and refill pure water
The power-on indicator light is on and the humid-
ifier cannot be started
The water in the water tank is too full
Pour out a little water and close the lid tightly
Too little fog
There is dirt on the atomizing film, or the water in
the water tank is left for tol long
Clean the water tank and add pure water
Noisy
Too little water and the hunidifier is tilted
Ensure the amount of water, place the humidifier
in a clean place, and require the base to lie flat
WARRANTY
The units are thoroughly checked before delivery.
Should a defect nevertheless occur on your unit,
please contact your seller in confidence. Please
bring the proof of purchase with you, as this must
be presented for any warranty service. The warran-
ty period is 24 months from the date of purchase.
Firma
Armin Schmid
Olensbachstrasse 9-15
CH-9631 Ulisbach
Tel. Int. +41 71 987 60 60
Tel. Nat. 0848870850
www.sonnenkoenig.ch
HERMONIA
HUMIDIFIER
User Manual
Article-Nr. 40500401
PRODUCT STRUCTURES
Note
: The accessories in the package are exclusive-
ly used for the product. The appearance and quan-
tity may be different for different batches. Please
refer to the auctual delivery
INSTRUCTIONS FOR USE
After power on, press the power button with a beep,
and start with the default function after a beep:
1.
Atomization degree: high
2.
Timing: 3h
3.
Light brightness: large
4.
Lighting effect: full bright
When there is no wawter: 3 beeps, within 2s, then it
will automatically shut down.
When the time is up: A long “beep” sound, and then
automatically shut down.
There will be a abeep every time you press a key.
Nebulizer failure: The LED flashes quickly for 2s,
then a long “beep”, and then automatically shuts
down.
Fan failure: The LED flashes quickly for 2s, then a
long “beep” sound, and then automatically shuts
down.
TROUBLESHOOTING
1.
Remote control
2.
Shell
3.
Light
4.
Top cover
5.
Water tank
Technical Specifications
Power:............................................................... 10 W
Dimensions:.................................. 20 x 80 x 12.5 cm
Weight:............................................................ 500 g
Atomization amount:.......................... 15–25 ml/h
Water tank capacity:...................................... 20 ml
1
2
3
4
5
SAVETY PRECAUTIONS
If it is the first time to use, please remove the insu-
lating sheet on the remote control.
If you need to add water, the remote control needs
to be unplugged from the housing before the hous-
ing can be opened.
Open the shell and prepare to add water.
Teh water filling position needs to be filled accord-
ing to the designated position.
The maximum water volume is 200 ml, or it cannot
exceed the indication line of the maximum water
level, otherwise it will affect the atomization effect
or cause water leakage and cause damage to the
machine.
Plug in the supplied power cord, Type-C, 2A. If you
use an alternative power cord, you must pay atten-
tion to the current specification of 1A, otherwise it
will affect the atomization efect.
Pay attention to the selected distributor, its output
current cannot be lower than DC5V 1.5 A, otherwise
it will affect the atomization effect.
Use the remote control to turn on the atomizer, and
then select the desired function and effect.
The atomizer has a memory memory function. If
the power is not completely removed, the atmizer
will record the last used function set. If it needs to
be reset, the power cord must be completely un-
plugged.
After use, you must pour out the remaining water in
the water tank, so tht your atomizer an achieve the
best maintenance effect.
note that pouring water needs to follow the in-
structions, otherwise it will damage the atomizer.
Please use pure water, so that your atomizer will
not be damaged due to impurities in the water, so
as to achieve the best mainenance effect.
Do not place on unsafe or delicate surfaces.
Keep sensitive electronic devices away.
Descale the appliance with care.
Power on / Power off
High (violent flame effect)
Low (soft flame effect)
1 h (light yellow light)
3 h (default: yellow light)
6 h (dark yellow light)
Light brightness
large / medium / small / off
Lighting effect
full / breathing / flashing
FUNCTION SELECTION
Note:
If the above methods cannot be improved,
please consult the customer service hotline and
contact a professional for repair.
SYMPTOM
POSSIBLE CAUSES
APPROACH
Press the power, the power-on indicator does not
light up, and the hunidifier cannot be startet
Improper connection of the adaper
Connect the cable and press the switch button
again
The indicator light on the switch is on, the small
fan rotates, and there is no fog
The water tank is short of water or too little water
Add purified water
The humidifier emits a peculiar smell
There is scale in the water tank, the added water
has impurities, or the water is left for too long
Remove the lid of the water tank and place it in
a cool place or more than 12 hours to ventilate,
clean the water tank and refill pure water
The power-on indicator light is on and the humid-
ifier cannot be started
The water in the water tank is too full
Pour out a little water and close the lid tightly
Too little fog
There is dirt on the atomizing film, or the water in
the water tank is left for tol long
Clean the water tank and add pure water
Noisy
Too little water and the hunidifier is tilted
Ensure the amount of water, place the humidifier
in a clean place, and require the base to lie flat
WARRANTY
The units are thoroughly checked before delivery.
Should a defect nevertheless occur on your unit,
please contact your seller in confidence. Please
bring the proof of purchase with you, as this must
be presented for any warranty service. The warran-
ty period is 24 months from the date of purchase.
Firma
Armin Schmid
Olensbachstrasse 9-15
CH-9631 Ulisbach
Tel. Int. +41 71 987 60 60
Tel. Nat. 0848870850
www.sonnenkoenig.ch
HERMONIA
HUMIDIFIER
User Manual
Article-Nr. 40500401
PRODUCT STRUCTURES
Note
: The accessories in the package are exclusive-
ly used for the product. The appearance and quan-
tity may be different for different batches. Please
refer to the auctual delivery
INSTRUCTIONS FOR USE
After power on, press the power button with a beep,
and start with the default function after a beep:
1.
Atomization degree: high
2.
Timing: 3h
3.
Light brightness: large
4.
Lighting effect: full bright
When there is no wawter: 3 beeps, within 2s, then it
will automatically shut down.
When the time is up: A long “beep” sound, and then
automatically shut down.
There will be a abeep every time you press a key.
Nebulizer failure: The LED flashes quickly for 2s,
then a long “beep”, and then automatically shuts
down.
Fan failure: The LED flashes quickly for 2s, then a
long “beep” sound, and then automatically shuts
down.
TROUBLESHOOTING
1.
Remote control
2.
Shell
3.
Light
4.
Top cover
5.
Water tank
Technical Specifications
Power:............................................................... 10 W
Dimensions:.................................. 20 x 80 x 12.5 cm
Weight:............................................................ 500 g
Atomization amount:.......................... 15–25 ml/h
Water tank capacity:...................................... 20 ml
1
2
3
4
5
SAVETY PRECAUTIONS
If it is the first time to use, please remove the insu-
lating sheet on the remote control.
If you need to add water, the remote control needs
to be unplugged from the housing before the hous-
ing can be opened.
Open the shell and prepare to add water.
Teh water filling position needs to be filled accord-
ing to the designated position.
The maximum water volume is 200 ml, or it cannot
exceed the indication line of the maximum water
level, otherwise it will affect the atomization effect
or cause water leakage and cause damage to the
machine.
Plug in the supplied power cord, Type-C, 2A. If you
use an alternative power cord, you must pay atten-
tion to the current specification of 1A, otherwise it
will affect the atomization efect.
Pay attention to the selected distributor, its output
current cannot be lower than DC5V 1.5 A, otherwise
it will affect the atomization effect.
Use the remote control to turn on the atomizer, and
then select the desired function and effect.
The atomizer has a memory memory function. If
the power is not completely removed, the atmizer
will record the last used function set. If it needs to
be reset, the power cord must be completely un-
plugged.
After use, you must pour out the remaining water in
the water tank, so tht your atomizer an achieve the
best maintenance effect.
note that pouring water needs to follow the in-
structions, otherwise it will damage the atomizer.
Please use pure water, so that your atomizer will
not be damaged due to impurities in the water, so
as to achieve the best mainenance effect.
Do not place on unsafe or delicate surfaces.
Keep sensitive electronic devices away.
Descale the appliance with care.
Power on / Power off
High (violent flame effect)
Low (soft flame effect)
1 h (light yellow light)
3 h (default: yellow light)
6 h (dark yellow light)
Light brightness
large / medium / small / off
Lighting effect
full / breathing / flashing
FUNCTION SELECTION
Note:
If the above methods cannot be improved,
please consult the customer service hotline and
contact a professional for repair.
SYMPTOM
POSSIBLE CAUSES
APPROACH
Press the power, the power-on indicator does not
light up, and the hunidifier cannot be startet
Improper connection of the adaper
Connect the cable and press the switch button
again
The indicator light on the switch is on, the small
fan rotates, and there is no fog
The water tank is short of water or too little water
Add purified water
The humidifier emits a peculiar smell
There is scale in the water tank, the added water
has impurities, or the water is left for too long
Remove the lid of the water tank and place it in
a cool place or more than 12 hours to ventilate,
clean the water tank and refill pure water
The power-on indicator light is on and the humid-
ifier cannot be started
The water in the water tank is too full
Pour out a little water and close the lid tightly
Too little fog
There is dirt on the atomizing film, or the water in
the water tank is left for tol long
Clean the water tank and add pure water
Noisy
Too little water and the hunidifier is tilted
Ensure the amount of water, place the humidifier
in a clean place, and require the base to lie flat
WARRANTY
The units are thoroughly checked before delivery.
Should a defect nevertheless occur on your unit,
please contact your seller in confidence. Please
bring the proof of purchase with you, as this must
be presented for any warranty service. The warran-
ty period is 24 months from the date of purchase.
Firma
Armin Schmid
Olensbachstrasse 9-15
CH-9631 Ulisbach
Tel. Int. +41 71 987 60 60
Tel. Nat. 0848870850
www.sonnenkoenig.ch
