Installation Guide
Page
23
of
26
Figure 15: Setting up the sonnenProtect-Plus in Commissioning Assistant 2.0.
7.3
Changing the backup buffer using the Web Interface of the storage
system
Proceed as follows to set what percentage of the capacity of the storage system should be
available for the sonnenProtect-Plus in the event of a grid outage.
Conditions:
The storage system is connected to the router of the home network.
Your laptop or PC also accesses the home network.
The sonnenProtect-Plus was set up by the installer using the Commissioning Assistant
2.0.
On the web interface of the storage system, navigate to the
Settings
page.
Change the percentage for
Backup buffer
to a desired value.
Figure 16: Setting the backup buffer using the web interface of the storage system.