Sonnen sonnenBatterie pro 2.0, Инструкция по эксплуатации

Страница: 8 / 16

2 | Product description
8 / 16 Instructions sonnenBatterie pro 2.0
2.2 Overview of function and installation
These sonnenBatterie pro 2.0 instructions are a supplement to the applicable
product documentation for the sonnenBatterie eco 8.0. The product docu-
mentation, above all the installation instructions, must always be observed.
• The sonnenBatterie pro 2.0 consists of three individual eco 8.0 storage systems.
• During installation one storage system is designated as the master and the other two as
slave 1 and slave 2. The master storage system controls the other storage systems after
installation is complete.
• Connections such as the Modbus line or signal line are made on the master storage sys-
tem.
• The storage systems are connected to each other by Ethernet cable. An external switch
is installed for this purpose, to which all three storage systems are connected. The
switch is connected to the home network router.
• If a router with a sufficient number of free slots is available, the external switch can be
omitted.
5
2
A1 A2
1
4
3
6
Master
7
Slave 2 Slave 1
8 9
Illustration 2: System components
1 Power meter WM271
2 Modbus line (not included in scope of delivery)
3 Mains line
4 Switch (not included in scope of delivery)
5 Ethernet line (not included in scope of delivery)
6 Home network router (not included in scope of delivery)
7 Master storage system (with Display)
8 Slave 1 storage system
9 Slave 2 storage system