Sonnen sonnenBatterie hybrid 9.53, Руководство по эксплуатации, Страница: 19 / 28

Digital sonnen world | 5
KD-564 | 1001821 | EN | 03 19 / 28
5.2.2 Dashboard page
The start page of the web interface (Dashboard) provides an initial overview of the current
status of your storage system. All of the energy flows are specified there in watts and clari-
fied with arrow indicators.
The current production of the PV system and the consumption of the electrical consumers
in the building are displayed in contrast with the storage system and the public electricity
grid. Usage from the public electricity grid is displayed when production and the electricity
available from the storage system are not sufficient to meet the energy needs of the build-
ing. Feed-in is displayed when there is sufficient electricity available to feed some into the
public grid within any existing feed-in limit.
The state of charge (SOC) of the battery modules is specified in relation to the storage
system and information as to whether the storage system is storing electricity (charging)
or providing electricity (discharging) is displayed.
5.2.3 System page
The System page provides technical background information on your storage system.
For example, you can see how many battery modules are installed (General Information >
Capacity) and what the maximum power provided by the inverters is (General Information
> Inverter Max. Power).
The other information, such as the serial number and model designation of your storage
system (each under General Information), may be necessary in the event of a fault, if you
contact the electrician performing the installation or the sonnen service team, for ex-
ample.
5.2.4 Inverter page
The Inverter page is where a self-test can be performed. This is necessary for inverters
commissioned in certain countries (including Italy).
Since this function is only required in certain regions, the test is only displayed if a corres-
ponding country code was selected for the inverter during commissioning.