Sonnen sonnenBatterie eco 9.43, Руководство по установке, Страница: 19 / 60

Mounting | 5
KD-446 | 22213 | EN | X03 19 / 60
5.3.2 Removing the cover of the extension cabinet (optional)
Illustration 5: Removing the cover of the exten-
sion cabinet
To remove the cover of the extension
cabinet:
„
Remove the three screws.
„
Slide the cover up.
5.4 Mounting the storage system
Illustration 6: Storage system with optional ex-
tension cabinet (floor mounted) / Storage sys-
tem without extension cabinet (wall mounted)
• A storage system without the optional
extension cabinet must be mounted to
the wall with screws.
• A storage system with the extension
cabinet must be floor mounted.
WARNING
Inadequate protection against contact if installed without base cabinet
Risk of injury from contact with the battery modules through the openings in
the floor of the main cabinet!
„
Ensure that both openings in the floor of the main cabinet are sealed
with the provided blanking plugs on the inside and the locknuts on the
outside of the storage systems.
Permissible blanking plugs
3
must meet the following requirements:
3
Additional blanking plugs and nuts are available from sonnen GmbH.