Sonnen sonnenBatterie eco 8.0/10, Руководство по эксплуатации

Страница: 17 / 36

Switching on the storage system | 4
KD-436 | 22283 | EN | 04 17 / 36
4 Switching on the storage system
The storage system can only be switched on if the public network voltage has
been switched on first.
4.1 Switching on the grid voltage
„
Switch on the grid voltage using the AC miniature circuit breaker.
4.2 Switching on the storage system
NOTICE
If the storage system can’t be switched on:
„
Do not attempt switching on the storage system more than three times.
„
Contact the service!
ð
Further attempts can damage the battery modules.
Fuse switch F1 establishes the connection between the battery and the inverter.
Illustration 7: Fuse switch F1 on the top side of
the storage system
„
Switch on fuse switch F1.
The storage system then starts up and performs a self-test. Once the self-test is success-
ful, the storage system is ready to operate.
When the storage system is in normal operation, the sonnen Eclipse pulses white (see
Function of the sonnen Eclipse [P. 16]).