Sonnen Protect 1300, Руководство по установке

Страница: 28 / 36

8 | Commissioning
28 / 36 Installation instructions sonnenProtect 1300
If the sonnenProtect is behaving as described in section Function [P. 11], the function
test is successful. The sonnenProtect can be operated.
If the sonnenProtect is not behaving as described in section Function [P. 11], the
sonnenProtect must not be operated.
„
In this case, check the wiring (see section Installation with sonnenBatterie eco 8.2
[P. 17] or Installation with sonnenBatterie eco 9.43 [P. 22]).
„
Contact the sonnen customer service if the problem cannot be solved.
8.3 Setting up the sonnenProtect
8.3.1 Generating a commissioning code
We recommend that you generate a commissioning code before installing the
sonnenProtect on the premises of the storage system operator.
Conditions:
ü
There must be an Internet connection.
ü
You must have access details for the Internet portal.
„
Enter the following address into your browser’s address line to access the Internet
portal: https://my.sonnen-batterie.com
„
Log on to the Internet portal.
„
Go to the page called ‘sonnenProtect’.
„
Enter the serial numbers of the sonnenBatterie and the sonnenProtect units
which are to be connected. You will find the serial numbers on each unit’s type
plate.
„
Confirm your entries. The commissioning code will be displayed.
„
Make a note of the commissioning code.
8.3.2 Establishing connection to the storage system
„
Connect the laptop (4) to the router of the home network (2). The storage sys-
tem must also be connected to the router of the home network.
4
3
1
2
Illustration 21: Ethernet wiring