8-bit micro-controller
SN8ICE 2K User Manual
SONiX TECHNOLOGY CO., LTD
Page 16
Preliminary V0.1
Any time the program stops, “Watch” function could be set to monitor the variable. Select one of the
empty edit box of each page of “Watch” page, and enter the variable name you want to monitor.
Figure 4-13 Program stops and watch variable
Click “Debug-> Reset” from the menu or press “Ctrl+F5” to reset the program. Then, you may emulate
again starting from the program reset vector.
4.3 CONNECT TO TARGET BY TRANSITION BOARD
The CON1 is the generic I/O port including all I/O of SN8P2xxx series. Connect different transition
board to CON1 to meet each MCU’s pin assignment. After ICE board V1.3, the CON1 is male socket.
Please populate 60 pins
female
socket on transition board and connect transition board to SN8ICE 2K as
following figure:
Figure 4-14 The 60 pins socket of transition board is
female
type
