40
Managing Phone Settings
Network Selection
To modify the network access settings, select
Menu >
Settings > Network settings > Network selection
. The
following network settings are displayed:
You can select your network, specify the network
account, and indicate whether GPRS is required at all
times.
•
New search:
Search the network for the phone
to connect when you are selecting the network
manually.
•
Select Network
: Select the network
automatically or you can do it manually.
•
Selection Mode
: Select
Automatic
to set the
phone to automatically select a cellular network
available in your area, or select
Manual
to set
the network manually. If manual mode is set,
the user has to invoke
Select Network
to do
network selection.
Data Connection
To set registration preferences for accessing data
connection, select one of the following options:
•
Always
- Register with the data connection,
continuously.
•
When needed
- Register only when data transfer is
required.
Data Account
You can set the network account and view the data
connection information.
You can add, view, edit and delete the accounts. You can
edit the following information in the accounts: Account
Name, APN, Username, Password, Authentication type,
Advanced settings, MMSC/Homepage , Connection
type, Use proxy, Proxy address, Proxy port, Proxy user
name, Proxy password, Primary DNS, Secondary DNS, IP
Address, and Subnet mask.Make the changes and select
OK
. Then
Add new packet data account
will pop up,
select
Yes
.
Service Selection
In service selection user can Set GSM/WCDMA/
Automatic mode.
AGPS Settings
Your handset is equipped with a GPS receiver, that
supports AGPS (Assisted GPS) functionality. This helps to
calculate your current location. When an user accesses
an application that requires GPS, then the receiver is
turned on automatically. After the application is closed, it
is turned off automatically.
A GPS receiver calculates its current location by
monitoring broadcast signals from GPS satellites. Hence
it is important that the handset is exposed to the sky.
AGPS feature helps the GPS receiver to acquire certain
information through data connection and/or network
messages. This information is used during the position
calculation process. This significantly increases the ability
to calculate position at low signals. It also speeds up
the time required to calculate the position. Please note
that some AGPS features could be network dependent.
In some cases, AGPS uses external data connectivity,
which may result in network charges.