iv
1
Introduction
Safety & Installation
iv
Connect the equipment in accordance with the connec�on details and
before applying power to the unit, check that the machine has the correct
opera�ng voltage for your mains power supply.
This apparatus is of a class I construc�on. It must be connected to a mains
socket outlet with a protec�ve earthing connec�on.
Important note: If there is an earth/ground terminal on the rear panel of
the product then it must be connected to Earth.
WEEE Directive
The Waste Electrical and Electronic Equipment (WEEE) Direc�ve
was
agreed on 13 February 2003, along with the related Direc�ve
2002/95/EC on Restric�ons of the use of certain Hazardous
Substances in electrical and electronic equipment (RoHS). The
Waste Electrical and Electronic Equipment Direc�ve (WEEE) aims to
minimise the impacts of electrical and electronic equipment on the
environment during their life �mes and when they become waste. All
products manufactured by Sonifex Ltd have the WEEE direc�ve label placed
on the case. Sonifex Ltd will be happy to give you informa�on about local
organisa�ons that can reprocess the product when it reaches its “end of
use”, or alterna�vely all products that have reached “end of use” can be
returned to Sonifex and will be reprocessed correctly free of charge.
Atmosphere/Environment
This apparatus should be installed in an area that is not subject to excessive
temperature varia�on (<0°C, >50°C), moisture, dust or vibra�on.
This apparatus shall not be exposed to dripping or splashing, and no objects
filled with water, such as vases shall be placed on the apparatus.
Territory
Voltage IEC Lead Type
Image
UK & Middle East
230V
UK 3 pin to IEC lead
Europe
230V
European Schuko
round 2 pin to IEC lead
USA, Canada and South
America
115V
3 flat pin to IEC lead
Australia & New Zealand
230V
Australasian 3 flat pin
to IEC lead
