53
Embedded Web Server
13
53
System Menu
14
14. System Menu
The easiest method for reviewing and changing the system configura�on
op�ons is via the web server. The system menu, accessed via the front
panel, offers alterna�ve access to a limited set of op�ons and informa�on.
Each layer of the menu structure, apart from the main menu, has a “BACK”
op�on which ascends to the parent menu. All layers have a “CLOSE” op�on
which exits the system menu and returns to the main screen.
Fig 14-1: Main System Menu
To access the system menu, press and hold the naviga�on centre bu�on
un�l the menu appears. The le� side of the screen shows the current
posi�on within the menu structure. The right side shows the available
menu selec�ons or the op�ons related to the current menu item. To
navigate through the menu, use either the naviga�on outer up/down
bu�ons or the inner rotary control to highlight the required item and then
press either the centre bu�on or the right bu�on. The configura�on
se�ngs within the menu structure are presented either as a list of op�ons
with a �ck to show the current selec�on, or in a dialog which allows the
value to be changed. For listed op�ons, highlight the required se�ng and
press the centre bu�on to select. Op�ons presented in a dialog give
guidance on how to change the current se�ng. To ascend up the menu
structure, press either the naviga�on outer le� bu�on, or select the op�on
“back”.
The following sec�on gives a brief descrip�on of the op�ons within each
branch of the menu tree. This is a condensed list such that menu items with
similar associated op�ons have only been listed once.
System Info
The read only System Info menu item shows important informa�on about
the unit. In par�cular, it shows the current IP addresses for the 2 network
ports which will be required when accessing the embedded web server. The
PTP clock informa�on is dynamic and shows the current status, whether
Listening, Master or Slave. The ID of the current master is shown as well as
the clock offset from the master clock if the unit is currently a slave. The
state of the AC-DC power supply and DC power input is also dynamic and
shows the voltage level of each supply.
System Info
→ Intercom Name
Intercom Mode
Ethernet Port
Network Mode
IP Address
Subnet Mask
MAC Address
AoIP Port
Network Mode
IP Address
Subnet Mask
MAC Address
PTP Clock
Status
Domain Number
Master ID
Master Offset
AC-DC Voltage
DC Voltage
Version
FP Version
PM Version
Serial
SOM Serial
