7
Introduction
1
7
Getting Started
2
2. Getting Started
We recommend you read the manual in this order.
1. View the
Quick Start
section to get your device up and running.
2. Setup device names and channel labels in Dante Controller, view the
Configuring a Device
section for instructions.
3. Routing audio in Dante Controller, view the
Routing Audio
section for
instructions.
4. Adding Dante inputs and Dante outputs to the commentator unit, view
the
Adding Dante Input and Output Groups
section for instructions.
5. Configuring user buttons on the top panel of the commentator unit, view
the
Front Panel Settings and Control
section for instructions.
6. Controlling inputs, outputs, and mix-points with encoders, view the
Adding an Encoder
section for instructions.
7. Locking user buttons and encoders, view the
Locking User Buttons and
Encoders
section.
8. Saving and loading profiles, view the
Save Configuration to A File
section
and the
Load Configuration from A File
section.
9. Controlling the commentator unit remotely, view the
Remote Control
section.
