SonicWall Switch Getting Started Guide
Configuring from the Firewall
23
Before Adding a Switch
•
Be sure to first register your Switch on MySonicWall. Refer to
.
•
Consider the firewall/Switch topology to be implemented. Refer to
.
•
When adding a Switch manually, first check that it is configured to factory defaults. This can be ensured
by depressing the reset Switch for 10 seconds or from the Switch Local UI, or the Command Line
Interface.
•
When adding a management link to a Switch manually, ensure that the DHCP lease range supports the
default management IP address. Refer to
Connecting the Switch Management Port to a Firewall
.
•
If the management link between the switch and firewall is isolated from data traffic, the switch must
configured at a static IP address.
•
The firewall interface linking to the Switch interface cannot be a PortShield host and no other firewall
interface can be portshielded to it. The firewall interface linking to the Switch cannot be a PortShield
group member, that is, it cannot be portshielded to another firewall interface.
•
Switches may be added into daisy-chained configurations manually or by using Zero-Touch.
•
For daisy chaining Switches, consider setting up a common link (management and data) with sufficient
capacity and do not make further connections from firewall to parent switch without configuring them.
Make any other connections from the firewall to the Switch when you add the Switch.
•
Make any changes in the Reserved VLAN range for the firewall interface before adding the SonicWall
Switch. If the Reserved VLAN range changes after connecting the Switch, then the Switch must be
removed and re-added.
•
Logging into switch with SSHv1 client is not supported.
•
If adding Switches to a High Availability (HA) pair:
•
Switches cannot be added to HA pairs with Zero-Touch.
•
To use the Switch with HA, you must first create an HA pair, and then manually add the Switch.
Checking Switch Details
Navigate to
Switches > Switch
to get a summary on switches connected to the firewall.
Содержание SWS12 Series
Страница 1: ...SonicWall Switch Getting Started Guide...
