SonicWALL Email Security 6000 Getting Started Guide Page 19
Using Quick Configuration to Set Up Email Management
The Quick Configuration page will walk you step-by-step through the configuration of
your SonicWALL Email Security appliance. Use this window the first time you configure
SonicWALL Email Security if you are installing SonicWALL Email Security as an All-In-
One server and have only one downstream server. More options for these settings are
available in the other Server Configuration pages.
Click
at the bottom of the
Server Configuration > License Management
page to launch the
Quick
Configuration
page.
Network Architecture
1. Configure the inbound and outbound message processing paths:
Inbound destination
server:
Click
for more information.
Inbound SMTP
setup:
Select one of the two inbound SMTP setups options. If you
select to specify domains, enter the domains to permit.
Separate domains with a <CR>. Example:
example.com
example.net
Click
to test communication with
the domains you entered.
Outbound path
setup:
Check this box to route outbound mail across the Internet
using MX records.
