Sonic KCS-5200, Руководство по эксплуатации

Страница: 24 / 153

3-2
1. Cursor Information: Shows the latitude and longitude of the cross cursor. It also displays
the direct and horizontal distances as well as the depth and the
compass bearing from the ship to the cross cursor. For the cursor
information, the display size and whether to display or hide the
information can be selected by menu setting. This information is not
displayed if no latitude and longitude information of the ship is input
from an external device (Note).
2. Bearing Mark: Indicates the bearing scale. This information changes according to
the ship heading information input from an external device (Note).
3. Audio Mark: Shows both the range to be converted into audio sound and the
range to be displayed in the dual audio screen. The area
surrounded by two yellow lines is the signal range.
4. Bow line: Shows the bow direction. (blue line)
5. Wind Direction and Speed Mark: Shows the wind direction and speed mark.
6. Memory No.: Shows the memory No. that stores the set values currently in use.
The standard setting is indicated as “STD.” When any change is
made in the stored setting, it is shown in red.
7. Gain: Shows the gain of the horizontal sonar screen currently in use.
8. Tilt: Shows the tilt value of the TX/RX directional beam currently in use.
9. Range: Shows the display range of the horizontal sonar screen currently in
use. This information is the distance from the ship position to the
bearing mark.
Note: An external device cannot be connected to some models. Contact our service staff for
inquiries.