Sonel S-36 VLF, Руководство пользователя

Страница: 8 / 36

S-36 VLF
– USER MANUAL
6

Exploitation instructions of flexible cables and wires included with the device

Wires that control the HV unit are permanently fixed to the control unit.

Portable electrical equipment may be connected to the power supply only via the con-
nectors (plug, socket outlet) provided for this purpose.

It is not permissible to use adapters and plugs fitting into socket outlets for other voltage
levels.

When exchanging cable connections, make sure that connection is made in correct
phase sequence.

Regulations for handling cable accessories

Secure cable clamps by retaining washers and spring lock washers against becoming
loose by vibrations. When reconnecting cables to devices and equipment, make sure
the cable shield is earthed and that the cable entry fitting is tight (in accordance with de-
gree of protection of pertaining device).
1.2 Warnings
Important instructions relating to personal and operational protection as well as to technical safety
are identified as follows in the text:
WARNING
This symbol appears whenever working instructions and procedures must be
strictly observed to avoid harm to persons. Non-observance may result in seri-
ous personal injury or death and/or damage to the unit.
NOTE!
This symbol appears whenever working instructions and procedures must be strictly
observed to avoid damage to or destruction of the unit and/or associated equipment.
Appears whenever it is necessary to draw your attention to certain technical require-
ments to be observed when working with the unit.