Sonel PAT-806-IT, Руководство пользователя

Страница: 58 / 76

PAT-806-IT
– USER MANUAL
56
5 Memory of measurement result data
PAT-806-IT meter has memory divided into 10 banks of 99 cells. Each measurement result can
be stored in a memory cell marked with a selected number and in a selected memory bank. Thanks
to this, the user of the meter can, at his/her option, assign memory cell numbers to individual meas-
urement points and the memory bank numbers to individual facilities. The user can also perform
measurements in any sequence and repeat them without losing other data.
Memory of measurement result data is not deleted when the meter is switched off. Thanks to
this, the data can be later read or sent to a computer. The number of a current memory cell or
memory bank is not changed either.
Notes:
- In a single cell you may store a set of results and other data (time, barcode, Pass/Fail, limit, etc) for
AUTO and IEC test or the result of a single measurement (+ time, code, Pass / Fail).
- It is recommended to delete the memory after reading the data or before performing a new series of
measurements that may be stored into the same memory cells as the previous ones.
5.1 Storing the measurement results in the memory
After completing measurement
press
ENTER .
Free cell.
Cell is filled with the
result of a single
measurement.