PM
AM
Display shown the square mark in 8 number, it indicates that the
next day is Sunday for the control, and they applies the sunday
settings for that day. Pressing ESC cancels and also returns to
automatic mode.
Reset
Pressing by 15 seconds the key deletes the custom settings
of the parameters and return to the factory settings. Only save in
memory the clock settings and the total hour counter.
Valve protection
Active for one minute the valve or circulator pump to prevent
damage from lack of use.
There are two counters one of total hours of operation of the
valve, and another counter for partial hours (this can be cleared
in menu).
Hours counter
Shown on the display when the batteries status is low and should
be changed.
Batteries
Days
The square will mark the current day and also the day on which
the change is executable.
Festive day
Frost protection
The control does not allow the temperature drops below the
limit temperature that supports the installation just before the
water pipes from freezing. Setting from the factory at 6°C.
To adjust go to menu within parameters.
ESC
RESET
15 SEG
Digit
The displays shows with big digits the reading ambient
temperature and in smaller digits the temperature setpoint or
current time.
7
Energy Control
Display information
PM
AM
KWh
MWh
