PART LIST
A [ 1] TABLE TOP
B [ 2] TABLE LEAVES
C [ 2] BASES
Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small parts that may have become
loose during shipment and place all parts on a non-abrasive surface.
IMPORTANT :These parts can be cumbersome and heavy to some people, therefore the assistance of two or more people is
recommended in order to prevent personal injury and ensure the furniture is not damaged during the assembly Process.
RAFFLES DINING TABLE
NO
D ESC RI PT I O N
QTY
1
2
3
4
HARDWARE LIST
LOCK WASHER
12
ALLEN HEAD BOLT
M8x70MM
6
PLAIN WASHER
ALLEN WRENCH
12
1
INSTRUCTIONS
1.
Gently, lay the table top (A) upside down on a soft
flat surface. Attach the table base into the table top,
align and insert Allen bolt (1) together with lock
washer (3) and flat washer (4) to each hole under
top through the hole on the stretcher of the base.
Tighten all the bolts by using wrench (5). DO NOT
OVER TIGHTEN. See
FIGURE 01.
2.
At the support rail installed on the bases, insert the
Allen bolts (2) together with lock washer (3) and flat
washer (4). Tighten all the bolts by using wrench (5).
DO NOT OVER TIGHTEN. See
FIGURE 02.
ALLEN HEAD BOLT
M8x40MM
6
5
SO N D ER
L I V I N G
1 2
/