Introduction
Thank you for purchasing a SLS Subwoofer. When properly installed,
this subwoofer will provide you with years of outdoor entertainment
pleasure. To get the most out of your new subwoofer, please read
this manual thoroughly before you begin installation.
Box Contents
SLS In-ground subwoofer boxes contain:
(1) In-ground subwoofer
(1) Dark brown canopy with ABS tube
(1) Rubber elbow
(2) Stainless steel hose clamps
(2) Silicon filled wire nuts
AS A GENERAL GUIDELINE, (1) SUBWOOFER WILL COVER
ABOUT 2000 SQUARE FEET OF LISTENING AREA
Figure 1 shows the SLS placed along the perimeter of the
entertainment area.
Select a central location for the subwoofer if using only one
subwoofer (see Figure 1) if using multiple subwoofers, select
locations that are the same distance from the main listening area.
Subwoofer Location Selection
The SLS is designed to deliver a seamless, evenly dispersed sound
field in an ‘open air’ environment. An array of multiple Satellite
speakers and Subwoofers should be strategically placed to
minimize ‘hot spots’ and ‘nulls’ as you move around the outdoor
entertainment area.
Sonamp DSP 2-750
Amplifier Power Planning
The maximum number of satellites and subwoofers that can
be used in a system will depend on the amplifier power,
refer to the SLS wattage calculator on the Sonance website
(www.sonance.com/outdoor/sonance-landscape-series/subwoofers).
In-Ground Subwoofer
1
LS12ESUB IN-GROUND SUBWOOFER
I N S T R U C T I O N M A N U A L
Figure 1
Subwoofer
