25
EN -Functions / H - Funkciók / SK - Funkcie / RO - Funcţii / SRB-MNE - Funkcije / CZ - Funkce /
HR-BIH - Funkcije
INSERT-STYLE ELECTRIC FIREPLACE
FEATURES
● Insert-style electric fireplace with built-in fan heater, for warming the air of indoor premises ● built-in energy saving LED light source
● realistic glowing log and flame effect, which can be used independently ● adjustable brightness ● switchable heating stages (1000
W / 2000 W) ● electronic thermostat ● weekly program ● window opening detection ● overheating protection ● remote control
OPERATION
The appliance can be controlled by the buttons on it or by remote control. Around the warm air outlet, the casing and the glass can be
hot! Touch the foldable grid only in front of its part above the warm air outlet and the buttons. Touch the appliance’s switches from the
front, so that your hand does not cross the warm air outflow, because it can be hot. When you switch it on for the first time, you may
feel a slight smell, which is a natural phenomenon. It is not dangerous and it slips by soon.
Set the main switch (6) to I (on) position, then the unit emits a short beep. The appliance can be switched on or off using the I/O push-
button on the front of the appliance. By being switched on, the flame effect will begin to operate only, without any heating function.
Holding the I/O button pressed will toggle among five brightness settings for the flame effect. The built-in fan heater can be activated in
two stages, 1000 W and 2000 W by using the push-buttons. Pressing the same buttons again will switch off the corresponding heating
stage. The appliance can be switched off anytime using the I/O push-button. The ON / OFF button (9)
on the remote control
functions
in the same way as the I/O button on the appliance. The 1000 W and 2000 W buttons (13 and 14) on the remote can be used to switch
on or off the corresponding heating stages. The currently selected stage can be checked on the appliance. With the help of the remote
control’s „+”, and „-” button, you can set the desired temperature, between 15 °C and 30 °C. The DIMMER (15) button can be used to
adjust the brightness of the flame effect in 5 increments.
To set
the date and the time
, turn on the unit with a remote control on/off button (9), then press the DATE / TIME button (10). First
select the day, by pressing the „▲”, or „▼” symbols of the selector button (11) on the remote control. Press the DATE / TIME button
again (10), then set the clock using the selector button’s „+” and „-” buttons. Press the DATE/TIME button (10) again, then set the
minute using the selector button’s „+” and „-” buttons. Press the selector button’s (11) „OK” symbol to store the set time.
SUN
MON
TUE
WED
THU
FRI
SAT
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
To activate the window opening detection function, press the remote control’s [
] push-button (24). If the [
] symbol appears on
the product’s display, the window opening detection is switched on. When the appliance detects a sudden drop in air temperature, it
switches off for energy saving reasons. In this case, the [
] symbol flashes on the display. If the device switches off like this, it will
not switch itself back automatically for 1 hour. Pressing the remote control’s [
] push-button (24) repeatedly you can switch this
function off, then the [
] symbol cannot be seen on the display.
Timer function
The unit can store up to 10 programs at the same time, for each program you can set the on / off time. The maximum length of each
program can be set to 23 hours and 50 minutes. Before setting the timer, chose and activate the desired heating level.
Set the timing
1. Press the TIMER SET button on the remote control (18)
2. Use the “+” or “-” symbols on the selector button (11) to select the desired program number (20)
3. Press the TIMER SET button on the remote control again (18)
4. Use the “▲” or “▼” symbols of the selector button (11) to move the cursor (27) to the desired day (28) and press the “+” symbol to
select it. Press “-” to remove previously selected days
5. Press the TIMER SET button on the remote control again (18)
6. Use the “+” or “-” symbols of the selector button (11) to select the switch on time (hours) (23)
7. Press the TIMER SET button on the remote control again (18)
8. Use the “+” or “-” symbols on the selector button (11) to select the switch on time (minutes) (23)
9. Press the TIMER SET button on the remote control again (18). The display will show “OFF” (21)
10. Use the “+” or “-” symbols on the selector button (11) to select the turn-off time (hours) (23)
11. Press the TIMER SET button on the remote control again (18)
12. Use the “+” or “-” symbols of the multi selector (11) to select the time off (minutes) (23)
13. Press the TIMER SET button on the remote control again (18)
