86
J-J-B
Warm-up time
The warm-up time of the camera. Only available if camera is powered by one of the switched 12-V
supplies (
SW
).
Value range
Default
Unit
0 … 120
30
sec
J-J-C
Solar nightshutdown
Activation of camera during the night. Only applicable if MRL-7 is solar powered.
Setting
Description
off
Camera takes pictures during night and day.
on (default)
Camera does not take picture during the night.
J-J-D
View
Function to acquire a picture. Activates the camera and displays the recorded JPEG-image in the Com-
mander. The image is also stored in the default download location of the commander (generally C:\Us-
ers\Public\Documents\Sommer\Data\). If triggered with a terminal editor, the acquired image is dis-
played in its binary code.
K
Special functions
A
Device status
B
View setup
C
Continuous measurement mode (tempo.)
D
Inspection, nominal values
E
Inspection, start process
F
Set factory default
G
Temp. load factory default
H
Relaunch program
I
Replace program
K-A
Device status
Displays information about the device, software version and its status.
K-B
View setup
Lists all parameters of the device in the terminal window.
K-C
Continuous measurement mode (tempo.)
Only available in terminal mode. When active, measurements are performed continuously, in the fast-
est possible interval. This mode can also be triggered under the Commander
Measurement
tab with
the command
Start polling measurements
, or via the keyboard of the MRL-7 (see Section
details).
The continuous measurement mode is disabled automatically after 3 minutes.
