24
Insert the wire into the connection terminal.
Make sure the wire is inserted down to the bottom of the connec-
tion terminal.
Pull out the screwdriver and verify that the wire is fixed firmly.
6.4
How to set the data logger clock
The time of the MRL-7 can also be synchronized manually by clicking
Set device time
in the Commander
Parameters (F2)
tab.
!
Attention
If the internal lithium button cell battery is replaced, the current data logger
time is lost and needs to be re-synchronized!
6.5
How to copy data to a USB flash drive
6.5.1
Copy data since last download
1.
Insert a USB flash drive into the USB port of the MRL-7.
2.
Activate the data logger.
3.
Press
. Data are now copied to the USB flash drive.
6.5.2
Copy all data
4.
Insert a USB flash drive into the USB port of the MRL-7.
5.
Activate the data logger.
6.
Press
until you get to the main menu.
7.
Navigate to
*** Settings ***
with
and
and press
.
8.
Enter the access code by pressing 2x
followed by 2x
.
