1
ZDMI INTERFACE
DESCRIPTION
The Somfy Z-Wave Digital Motor Interface (ZDMI) is a Z-Wave routing device
that resides as a node within a designated Z-Wave control network. It receives
Z-Wave transmissions and converts them to motor control commands for Somfy’s
Sonesse 50 ILT2 (AC) motor and Sonesse 30 RS485 (DC) motor. The interface
also receives feedback information from these motors and distributes it to the
Z-Wave network.
Part No: 187017
1
WIRING DIAGRAMS
Typical Sonesse 30 RS485 Motor Connection
Typical Sonesse 50 ILT2 Motor Connection
GENERAL REQUIREMENTS
•
The Sonesse 30 Motor configuration is powered externally by +24VDC. Using the Power Cable
(part no. 9016020) make sure that the white wire is on the left, and the black wire is on the right
+24 VDC
when plugged into the interface. Apply +24 VDC to the white wire, and -24 VDC to the black wire. -
24 VDC
•
The interface must be mounted within thirty (30) feet of each motor head and attached by a
Com cable to its respective modular communication port.
www.AVOutlet.com
