EQUINOX INTEGRATION GUIDE
©Vantage Equinox
Somfy: URTSI 2
page 7 of 7
XII. Tech Notes
Things to Know / Gotchas:
The Vantage Shade Group can be used to control individual shades, but a noticeable delay in shade movement will be seen
when controlling multiple shades with a single command. If a group address is made for the shades they will be much more
precise in their controls.
If a shade is experiencing difficulty responding to commands in a group command. Change the “Between Commands Delay”
property in the group to be longer.
XIII. Design Center Task Procedure Table
The following table shows the most common procedures that are available for programming Design Center tasks with the URTSI 2.
Tasks can be assigned to keypad buttons and Equinox scenes.
Available Task Procedures
Category
Folder
Procedure
Shades/Motors
Shades
Open Blind
Close Blind
Stop Blind
Set Blind Position
Advanced
LCD Touchscreen
Set Blind to Slider Value
