SOMFY sonesse 30 rts, Инструкция по эксплуатации, Страница: 25 / 108

Sonesse 30 RTS EN
Copyright
©
2020 SOMFY ACTIVITES SA. All rights reserved. 25
3.8.2.Adding/Deleting Somfy control points
NOTICE
Orange LED blinks slowly when adding or
deleting a remote control.
A A A A B
B B
3.8.2.1.Using a control point already programmed to the motorised
product
1] Press and hold the Prog . button (A) on the
programmed control point until the
motorised product briefly moves up and
down.
ð
Green LED blinks 5 times then orange
LED blinks slowly.
2] Briefly press the Prog . button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
1] 2]
PROG.
A
PROG.
B
3.8.2.2.Using the Programming button on the drive head
1] Press and hold the drive head
programming button until the motorised
product briefly moves up and down.
2] Briefly press the Prog . button (B) on the
control point to add or delete.
g Green LED blinks 5 times.
1] 2]
PROG.
B
3.8.3.Adding/Deleting RTS sensors
NOTICE
Orange LED blinks slowly when adding or
deleting an RTS sensor.
C C C
A A A A