SOMFY Sonesse 30 DCT, Инструкция по эксплуатации

Страница: 13 / 88

Sonesse 30 DCT EN
Copyright
©
2022 SOMFY ACTIVITES SA. All rights reserved. 13
2.5.Tips and advice on installation
2.5.1.Questions about the product?
Observations Possible causes Solutions
The motorised product is
noisy. The wheel and the crown
are not adapted to the used
tube. Change the wheel and the
crown.
The mechanical plays
between drive, accessories,
tube and end of tube are
too high. The mechanical plays
between drive, accessories,
tube and end of tube must
be decreased to the
minimum.
The wheel is not properly
fixed to the tube. Fix the wheel properly to
the tube.
The equipment is
constrained between the
brackets. Decrease the constraint
between the brackets.
The length of the notch is
not adapted to the drive
hook or to the used crown. Adapt the length of the
notch to the drive hook or
to the used crown.
Debris, screws or other are
in the tube. Empty the tube.
The temperature of the
environment is not in
conformity with the
operating temperature. Change the environment
temperature.
The motorised product
stops too soon or too late. The end limits of the
motorised product slip. Re-set the end limits
referring to
Readjusting
the end limits [ } 15]
End-limits are not properly
adjusted. Adjust the end-limit
referring to
Readjusting
the end limits [ } 15]