14/18
Copyright © 2016 Somfy SAS. All rights reserved. Non contractual images
QuickCopy & QuickCopy PC Software
Interactive operating instructions
Assigning additional storage locations in the PC
When the 10 storage locations are occupied and are insufficient, it is possible to assign additional
storage locations in the PC. However, these are only saved locally in the PC as .xml files.
1. In "Local files", left click on the sheet symbol to assign a
new file.
2. Click on the disk symbol to save the file.
> A confirmation of the saving process appears.
The data is saved in the "Database" sub-directory. This folder can be found at the same place where
the .exe data is located. Up to 100 files can be stored directly in this directory. If you have more files,
we recommend moving these to an additional directory, e.g. "Construction project". Doing this means
that the data will not be displayed when the QuickCopy Software is started.
5.2. Copy function of the software
The settings of a device can be copied quickly and easily to another device. In the QuickCopy device,
there are 10 storage locations available for Chronis / Soliris Smoove. For the Smoove UNO io, there
is one location available.
Copy procedure
The settings at a storage location, on the plugged-in device or data stored in a PC, can be copied
easily to another position (device, QuickCopy storage location or PC file).
1. Move the mouse cursor on the copy field.
2. Click the left mouse button.
3. Keep the left mouse button pressed and move the mouse cursor to a new position.
> If this position already contains configuration data, you are asked whether you really wish to
overwrite the current data.
Note:
Pay special attention when you are trying to copy between different device types. After the copy
procedure, we recommend checking the individual parameter settings. Some copy procedures are
blocked automatically. You can only transfer a plugged-in device to a device with the corresponding
configurations.
