13
EN
- GDK 700 installation and operating guide - SOMFY
1
EN
Installation
For the highest doors, it may be
necessary to cut the link arm.
During this operation, check that there is no risk that the back release device cable will subsequently become snagged
on an element protruding from the car (for example a roof rack).
1
2
I
J
•
Release the carriage using the manual back release
device and move the door to the open position.
Do not open the door fully, but position it so that it
does not reach its stops.
•
Position the stop against the carriage and secure it to the
rail.
1
2
1.4 Settings
! Adjusting and fastening the opening stop
•
If necessary, adjust the belt tension.
The tension rubber must never be fully compressed:
to obtain the correct tension, the rubber must measure
between 18 and 20 mm (distance “X”, see page 10).
! Checking the tension of the belt
! Fastening the link arm to the door and the carriage (continued)
