I D E N T I F Y D E V I C E
7 of 10
Reference the Somfy Control4 to Digital Motor Interface driver details located in the device Documentation tab.
A Somfy Control4 to Digital Motor Interface driver is required for each DMI installed.
1) The Control4 to DMI is automatically in Identify mode upon power up. For systems with multiple units, it is
recommended to power up and identify the units one at a time.
2) In the Composer Connections view Network tab, SELECT “Zigbee Network”
3) In the Zigbee Network Connections Device list, SELECT the DMI to be identified
4) SELECT “Identify”
5) PRESS & HOLD the Push Button on the DMI for seven seconds
6) Once the Address field populates the node address, SELECT “Close”
7) CONFIRM the device Status displays “Online”