SOMA SP-100, Руководство пользователя

Страница: 39 / 52

30
CAUTION
●
Before performing any maintenance, be sure to turn the power OFF and unplug the
charger if connected.
● DO NOT over-tighten hardware. This could cause damage to the frame and
hardware.
SUGGESTION
● Do not directly spray water on your wheelchair to wash it, as this could lead to a
malfunction in the electric system.
●
Do not use gasoline, solvents or other abrasive solutions; the casing may become
deformed or damaged.
WARNING
● After ANY adjustments, repair or service and BEFORE use, make sure that all
hardware is tightened securely, otherwise injury or damage may occur.
7.5 Suggested Maintenance Procedures
7.5.1 Before using the powered wheelchair, make sure all nuts and bolts are tight.
7.5.2 Check all parts for damage or wear and have a qualified technician replace it if
necessary.
7.5.3 Check all parts for proper adjustment.
7.5.4 Ensure that the batteries are properly maintained and charged as required.
7.5.5 Inspect brake for proper operation.
7.5.6 The wheels and tires should be checked periodically for cracks and wear, and
should be replaced by a qualified technician.
7.5.7 Regularly check for loose nuts and/or bolts in the front and rear wheels. If
loose, have them adjusted by a qualified technician.
7.5.8 Clean dirt, dust and grease from exposed components.
7.5.9 A qualified technician can be found with an authorized distributor/dealer.
7.6 Transporting and Storing
7.6.1 The wheelchair may be disassembled for ease of transport. Please refer to
section 5 for more detailed information on the individual steps. Reverse the
order for reassembly.
7.6.2 Please store the wheelchair in a location where it is out of direct sunlight, rain