SOMA Pulsar-23, Руководство пользователя

Страница: 51 / 172

51 The Pulsar-23 Notebook : Reference & Guide
Looper & Clock
3
NOTES
3.2 Master Clock Source
The master clock module has an internal clock generator which, by default
is used in Pulsar-23. There are also options to use an externally connected
MIDI clock or patch an external clock pulse input to the ‘CLK’ Pin. This is
selectable on the ‘INT MIDI’ 3-way switch. Pulsar-23 is intelligent enough to
establish the role of input and outputs when connected to the clock.
(1)
(1)
(1)
(1) The clock output is the default ‘hard wired’ function but can optionally be patched.
INT MIDI Switch is set to the left, {INT}. This will use the
internal clock generator as the master clock. The looper and
clock dividers will be based on this internal master clock.
INT MIDI Switch is set to the centre {EXT}. This will disable
and stop the internal clock. However an external clock >3V
connected to ‘CLK’ pin will be interpreted as the master clock
input and operate to this control. The looper and clock dividers
will be based on this external input as the master clock.
INT MIDI Switch is set to the right, {MIDI}. This will use the
clock received through the MIDI connection from an external
device. The external device will need to be set to send clock.
The looper and clock dividers will be based on the MIDI clock.
Internal Clock
Switch Left
External Clock
Switch Centre
MIDI Clock
Switch Right
Internal Clock
Generator
Internal Clock
Generator
Disabled
Internal Clock
Generator
MIDI Clock
Input
MIDI Clock
Input
MIDI Clock
Input
External Clock
Generator
External Clock
Generator
External Clock
Generator