SOMA Pulsar-23, Руководство пользователя

Страница: 102 / 172

102
The Pulsar-23 Notebook : Reference & Guide
NOTES
SHAOS & LFO
5
5.2 SHAOS Sequence Memory & Length
The pseudo-random sequencer has 3 lengths available, each of which is
selected from the 63-16-217, 3-way switch. While the {63} and {217}
settings are fixed lengths, the {16} option has a 16 step length but also
selects and controls the SHAOS internal memory. The 16 step memory can
capture patterns from the either one of the other two lengths or from a
signal modulating the ‘DATA’ input pin.
1 63
1 16 1 16
1 217
Switch Left
Random sequence, levels based on bits
Switch from left to centre to capture
16 steps from the 63 to memory
Switch from right to centre to capture
16 steps from the 217 to memory
By switching the switch to the {63} or {217} sequence position will play the pseudo-
random sequence. Switching back to the {16} step central position will capture a 16
step snapshot of the sequence into the memory, which is output at the ‘DATA’ pin.
Throwing this switch left / right to centre randomises the pattern
Manual recording of pulses into memory can be done through the ‘DATA’ input
switched in {16} Mode. Tapping to patch alternatively between the ‘+10V’ and ‘GND’ to
‘DATA’ will record pulses into the 16 step memory. This will record, evolve and drive
the output patterns.
Switch Right
Switch Centre
DATA
Captures to memory and
outputs sequences
Random sequence, levels based on bits
……. …….
DATA MEMORY