Page 17 / 17
CLEANING AND MAINTENANCE
Do not use acid, corrosive or abrasive cleaners.
Do not use pressure washers, steam cleaning equipment.
We recommend replacing filters after a maximum of two cleanings.
RESETTING THE REPLACE/CLEAN FILTERS NOTICE (RED FLASHING LED)
Press the button "RESET" located at the base of the front support of the ventilation unit for more than 5 seconds.
When the LEDs turn violet, the reset successfully completed.
Use always the supplied awl key to press the "RESET" button.
DO NOT USE METALLIC OBJECTS!
CUSTOMER SERVICE
Contact:
Solutionair Customer Service
Phone: 0800 484 3269
