Soluna S8 EU-A36, Руководство пользователя

Страница: 7 / 52

7 / 52
1.2 Safety guide
• After receiving this product, first confirm the product package is
intact. If any question, contact the logistic company or local
distributor immediately.
• The installation and operation of the machine must be carried out by
professional technicians who have received professional trainings,
and thoroughly familiar with all the contents in this manual and the
safety requirements of the electrical system.
• Do not carry out connection/disconnection, unpacking inspection and
unit replacement operations on the machine when power source is
applied. Before wiring and inspection, users must confirm the
breakers on DC and AC side of inverter are disconnected and wait
for at least 10 minutes
• Ensure there is no strong electromagnetic interference caused by
other electronic or electrical devices around the installation site.
• Do not refit the machine unless authorized.
• All the electrical installation must conform to local and national
electrical standards.
• Ground with proper technics before operation
• Do not open the surface cover of the machine unless authorized. The
electronic components inside the machine are electrostatic sensitive.
Do take proper anti-electrostatic measures during authorized
operation.
• Do not touch the housing of the machine or the radiator to avoid
scald as they may become hot during operation
• The machine needs to be reliably grounded.
• Ensure that DC and AC side circuit breakers have been
disconnected and wait at least 10 minutes before wiring and
checking.
Note: Technical personnel who can perform installation, wiring, commissioning,
maintenance, troubleshooting and replacement of the energy storage inverters
must meet the following requirements:
• Operators need professional training.
• Operators must read this manual completely, and master the related safety
precautions.
• Operators need to be familiar with the relevant safety regulations for electrical
systems.
• Operators need to be fully familiar with the composition and operating principle of
the entire energy storage system, and related standards of the countries/regions in
which the project is located.
• Operators must wear personal protective equipment.