67FV1
36
UART 2 Mode
This item allows you to select which mode for the
Onboard Serial Port 2.
The choice: Standard, HPSIR, ASKIR
IR Function Duplex
This item allows you to select the IR half / full duplex
function.
The choice: Half, Full.
TX, RX inverting
enabl
e
This item allows you to enable the TX, RX inverting
which depends on different H/W requirement. This
field is not recommended to change its default set-
ting for avoiding any error in your system.
The choice: “No, No”, “No, Yes”(default), “Yes, No”,
“Yes, Yes”.
Onboard Parallel Port
This item allows you to determine onboard parallel
port controller I/O address setting.
The choice: 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7,
Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel
(printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
The choice: SPP, EPP, ECP, ECP + EPP.
ECP Mode Use DMA
Select a DMA channel for the parallel port for use
during ECP mode.
The choice: 3, 1.
EPP Mode Select
Select EPP port type 1.7 or 1.9
The choice: EPP1.7, 1.9.
Onboard Legacy Audio
This field controls the onboard audio.
• Sound Blaster
• SB I/O Base Address
• SB IRQ Select
• SB DMA Select
• MPU-401
• MPU-401 I/O Address
• Game Port (200-207H)