SOLTEK SL-65ME Скачать руководство пользователя страница 8

8

65ME / 65ME+

1-7 INTEGRATED GRAPHICS

• 3D Hyper Pipelined Architecture.
   - Parallel Data Processing. (PDP)
   - Precise Pixel Interpolation. (PPI)
• Full 2D H/W Acceleration
• 2D Graphics up to 1600 X 1200 in 8-bit Color at 85 Hz Refresh.
• H/W Motion Compensation Assistance for S/W MPEG2 Decode.
• Integrated Graphics Memory Controller can be disabled to support  an

extenal AGP Card or PCI Graphics card.

• Provided an AGP Pro Slot which is compatible for AGP 1X/2X/4X mode

and AGP In-Line Memory Module(AIMM) up to 4 MB.

1-8 ONBOARD AUDIO DEVICE

• AC’97 2.1 Compliant Link for Audio and Telephony codecs (up to 6

channels)

• AC’97 CODEC on board.
• Creative PCI128 on board.(SL- 65ME+ only)

1-9 FORM FACTOR

• ATX form factor 4 layers PCB.
• Motherboard size: 20.0cm x 30.5cm

1-10 OTHERS

• Provides 5x PCI slots, 1x CNR slot, 1x AGP Pro slot and 3x DIMM sockets.
• Supports AGP 2.0 including 4X AGP data transfers.
• Supports SCSI, CD-ROM, ZIP, LS-120 boot up function.
• Supports USB Power-On function.
• Supports Wake On LAN (WOL) boot up function.
• Supports keyboard Power-On function.
• Supports BIOS Writing Protection.
• Supports BIOS Core Voltage Setting.
• Supports Jumper free function that allows user easily overclocking of fre-

quency and Voltage , Vcore through the BIOS setup.

NOTE:  To  use  Wake  On  LAN  (WOL)  function,  the ATX

power  supply  must  provide  at  least  5V/720mA
standby current capacity.

Содержание SL-65ME







































































Отзывы: