26
65ME / 65ME+
2-7.4 ATX POWER SUPPLY CONNECTOR
• This connector connects to an ATX power supply. The plug from the power
supply only inserts in an orientation because of the different hole sizes.
Find the proper orientation and push down firmly making sure that all pins
are aligned.
• Reminding that your power supply should support at least 10mA on the
5V standby voltage. It may cause an difficulty to power on the system if
the power supply cant support the load.
• For Wake On LAN function, the power supply should support at least
720mA current.
2-7.3 FLAT-PANEL DISPLAY CONNECTOR
• This motherboard provides a special socket “
DVC1
” for user to connect
to a flat-panel display adapter kit, and then connect it to a LCD monitor.
This flat-panel display adapter kit can be purchased from your
motherboard’s vendor and manufacturer. (This adapter kit does not un-
veil by the end of May 2000, but user can still get further details from your
motherboard dealer or website )
ClockB
Generator
LED1
AGP PRO
1 4
1 4
9 16
1 8
J2B
J3
SPK
RST
K
EYLOCK
T/LED
HDD/LED
IR
PWR
S
USPEND
++
--
+
-
1 15
1 15
I/O
Controller
FWH
Intel
ICH2
SOCKET 370
LPT1
V
GA1
COM1
GAME/MIDI POR
T
LINEB
OUT
LINEB
IN
MIC
PS/2B MOUSE
PS/2B K/B
upper
lo
w
e
r
USB1
USB0
upper
lo
w
e
r
D
VC1
Intel
815E
GMCH
Li
Battery
RT1
DIMM2 DIMM1 DIMM3
PCI 1
PCI 2
PCI 3
PCI 4
PCI 5
COM2
JW
OL1
CD_IN1B
CD_IN2
CNR
USB1
SCR1
1 3
1 3
JBAT1
JBAT2
IDE2 IDE1
FDC1
1 3
1 3
JP2B
JP8B
JP9
JP10
1 3
JP11
1 3
JP1
CPUFA1
ATX POWER
AUXFA1
1
11
1 3
1 3
JP5B
JP6
CHAF
A1
RT
2
AC'97B
Codec
+3.3 Volts
-12.0 Volts
GND
Power Supply On
GND
GND
GND
-5.0 Volts
+5.0 Volts
+5.0 Volts
+3.3 Volts
+3.3 Volts
GND
+5.0 Volts
GND
+5.0 Volts
GND
Power Good
+5.0V Standby
+12.0 Volts
2-7.5 SERIAL PORT CONNECTORS
• One serial port is ready for a mouse or other serial devices. A second
serial port is available using a serial port bracket connected from the
motherboard to an expansion slot opening.
PIN1
Serial Port Connectors:
Orient the red markings on the
floppy
ribbon cable to PIN1.