manualshive.com logo in svg

SOLTEK SL-65GS, Руководство пользователя, Страница: 53 / 53

Поделиться
Скачать
SOLTEK SL-65GS Скачать руководство пользователя страница 53

45

IDE HDD Auto Detection

IDE HDD Auto Detection detects the parameters of an IDE
hard disk drive and automatically enters them to the
Standard CMOS Setup screen.

The screen will ask you to select a specific hard disk for
Primary Master after you select this option. If you accept a
hard disk detected by the BIOS, you can enter “Y” to
confirm and then press <Enter> to check next hard disk.
This function allows you to check four hard disks and you
may press the <ESC> after the <Enter> to skip this function
and go back to the Main Menu.

Save & Exit Setup

Save & Exit Setup allows you to save all modifications you
have specified into the CMOS memory. Highlight this
option on the Main Menu and the following message
appears:

SAVE to CMOS and EXIT (Y/N)? Y

Press <Enter> key to save the configuration changes.

Exit Without Saving

Exit Without Saving allows you to exit the Setup utility
without saving the modifications that you have specified.
Highlight this option on the Main Menu and the following
message appears:
Quit Without Saving (Y/N)? N

You may change the prompt to “Y” and press the <Enter> key
to leave this option.

Содержание SL-65GS






















































Отзывы:

Нет отзывов