manualshive.com logo in svg

SOLTEK SL-65GS, Руководство пользователя, Страница: 39 / 53

Поделиться
Скачать
SOLTEK SL-65GS Скачать руководство пользователя страница 39

31

Name the interrupt request (IRQ) line
assigned to the modem (if any) on your
system.  Activity of the selected IRQ
always awakens the system. The choice: 3,
4, 5, 7, 9, 10, 11, NA.

Select Enabled if your system has a hot
key for soft power off. The choice:
Enabled, Disabled.

PM Timers

The following four modes are Green
PC power saving functions which are
only user configurable when User
Defined

 

Power Management has been

selected.  See above for available
selections.

HDD Off After

By default, this item is Disabled, meaning
that no matter the mode the rest of the
system, the hard drive will remain ready.
Otherwise, you have a range of choices
from 1 to 15 minutes or Suspend. This
means that you can elect to have your hard
disk drive be turned off after a selected
number of minutes or when the rest of the
system goes into a Suspend mode.

Doze Mode

When enabled and after the set time of
system inactivity, the CPU clock will run
at slower speed while all other devices still
operate at full speed.

Standby Mode

When enabled and after the set time of
system inactivity, the fixed disk drive and
the video would be shut off while all other
devices still operate at full speed.

MODEM Use
IRQ

Hot Key
Power Off

Содержание SL-65GS






















































Отзывы:

Нет отзывов