manualshive.com logo in svg

SOLTEK SL-65GS, Руководство пользователя, Страница: 38 / 53

Поделиться
Скачать
SOLTEK SL-65GS Скачать руководство пользователя страница 38

30

Video Off Method 

This determines the manner in which
the monitor is blanked.

V/H
SYNC+Blank

This selection will cause the system to turn
off the vertical and horizontal
synchronization ports and write blanks to the
video buffer.

Blank Screen

This option only writes blanks to the video
buffer.

DPMS

Select this option if your monitor supports the
Display Power Management Signaling
(DPMS) standard of the Video Electronics
Standards to select video power management
values.

Switch Function 

You can choose whether or not to permit
your system to enter complete Suspend
mode. Suspend mode offers greater power
savings, with a correspondingly longer
awakening period.The choice:
Break/Wake, Disabled.

Sets the CPU's speed during Doze mode.
The speed is reduced to a fraction of
CPU's normal speed. The divisors range
from 1 to 8. The choice: 1~8.

Select a divisor to reduce the CPU speed
during Standby mode to a fraction of the
full CPU speed.    The speed is reduced to
a fraction of the CPU's normal speed. The
divisors range from 1 to 8-0. The choice:
1~8

Doze Speed
(div by)

Stdby Speed
(div by)

Содержание SL-65GS






















































Отзывы:

Нет отзывов