manualshive.com logo in svg

SOLTEK SL-65GS, Руководство пользователя, Страница: 37 / 53

Поделиться
Скачать
SOLTEK SL-65GS Скачать руководство пользователя страница 37

29

Disable

No power management.  Disables all four modes

Min. Power Saving

Minimum power management.  Doze Mode = 1 hr.
Standby Mode = 1 hr., Suspend Mode = 1 hr., and HDD
Power Down = 15 min.

Max. Power Saving

Maximum power management -- 

ONLY AVAILABLE

FOR SL CPU’s

.  Doze Mode = 1 min., Standby Mode = 1

min., Suspend Mode = 1 min., and HDD Power Down = 1
min.

User Defined

Allows you to set each mode individually.  When not
disabled, each of the ranges are from 1 min. to 1 hr. except
for HDD Power Down which ranges from 1 min. to 15
min. and disable.

When enabled, an Advanced Power
Management device will be activated to
enhance the Max. Power Saving mode and
stop the CPU internal clock.  If Advance
Power Management (APM) is installed on
your system, selecting Yes gives better
power savings. If the Max. Power Saving
is not enabled, this will be preset to No.

 Video Off Option

When enabled, this feature allows the
VGA adapter to operate in a power
saving mode.

Always On

Monitor will remain on during power
saving modes.

Suspend --> Off

Monitor blanked when the systems enters
the Suspend mode.

Susp, Stby --> Off

Monitor blanked when the system enters
either Suspend or Standby modes.

All Modes --> Off

Monitor blanked when the system enters
any  power saving mode.

PM Control by
APM

Содержание SL-65GS






















































Отзывы:

Нет отзывов