manualshive.com logo in svg

SOLTEK SL-65GS, Руководство пользователя, Страница: 35 / 53

Поделиться
Скачать
SOLTEK SL-65GS Скачать руководство пользователя страница 35

27

When enabled, CPU access memory cycles and
PCI masters 

access memory cycles can be

concurrently issued onto host bus and PCI
bus, respectively, and then the memory
access cycles will be rearranged by SiS620
to memory sequentially.  When disabled,
either CPU or PCI masters starts memory
access cycle will block the other one's
cycle until the current cycle is finished.
The choice: Enabled, Disabled.

When this bit is enabled, CPU access PCI
bus cycle and PCI masters access memory
cycles can be concurrently issued onto
host bus and PCI bus, respectively.  By
doing this, these cycles will be forwarded
to PCI bus and memory bus at the same
time.  When disabled, either one of these
two kinds of cycles will block the other
until the current cycle is finished. The
choice: Enabled, Disabled.

Enable/disable the CPU pipeline control.
The choice: Enabled, Disabled.

CPU Host Clock

Choose Default,66/66,75/75,83/83,

(CPU/SDRAM)

95/95,100/100,112/112,124/124,
and1 33/133MHz.

CPU Clock Ratio

Choose 1.5X,2.0X, 2.5X, 3.0X, 3.5X,
4.0X, 4.5X,5.0X, 5.5X, 6.0X,6.5X,7.0X,
7.5X, or 8.0X.

3. Press <ESC> and follow the screen instructions to save or
disregard your settings.

Concurrent
Function [MEM]

Concurrent
Function [PCI]

CPU Pipeline
Control

Содержание SL-65GS






















































Отзывы:

Нет отзывов