manualshive.com logo in svg

SOLTEK SL-65GS, Руководство пользователя, Страница: 30 / 53

Поделиться
Скачать
SOLTEK SL-65GS Скачать руководство пользователя страница 30

22

Boot Sequence 

Default is “A, C, SCSI” This option
determines which drive to look at
first for an operating system.

Swap Floppy Drive  

Choose Enabled or Disabled
(default). This option swaps floppy
drive assignments when it is enabled.

Boot Up Floppy

Enabled (default): During POST,

Seek

 

BIOS checks the track number of the
floppy disk drive to see whether it
is 40 or 80 tracks.
Disabled: During POST, BIOS will
not check the track number of the
floppy disk drive.

Boot Up NumLock 

Choose On (default) or Off. This

Status

option lets user activate the
NumLock function at boot-up.

Memory Parity

Choose Enabled or Disabled(default).

check

 

Typematic Rate

Choose Enabled or Disabled

Setting

(default). Enable this option to
adjust the keystroke repeat rate.

Typematic Rate

Range between 6 (default) and 30

(Chars/Sec)

characters per second. This option
controls the speed of repeating
keystrokes.

Typematic Delay

Choose 250 (default), 500, 750, and

(Msec)

1000. This option sets the time
interval for displaying the first and
the second characters.

Содержание SL-65GS






















































Отзывы:

Нет отзывов