SOLTEK SL-65GS Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 53

SOLTEK SL-65GS Скачать руководство пользователя страница 1

i

Notice to End Users

This User’s Guide & Technical Reference is for assisting system
manufacturers and end users in setting up and installing the
mainboard.

Every effort has been made to ensure that the information in this
manual is accurate. Soltek Computer Inc. is not responsible for
printing or clerical errors.

Information in this document is subject to

change without notice and does not represent a commitment on the
part of Soltek Computer Inc.

No part of this manual may be reproduced, transmitted, translated into any
language in any form or by any means, electronic or mechanical, including
photocopying and recording, for any purpose without the express written
permission of Soltek Computer Inc.

Companies and products mentioned in this manual are for
identification purposes only. Product names appearing in this
manual may or may not be registered trademarks or copyrights of
their respective companies.

SOLTEK COMPUTER INC. PROVIDES THIS MANUAL “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL SOLTEK COMPUTER
INC. BE LIABLE FOR ANY LOSS OR PROFITS, LOSS OF BUSINESS, LOSS
OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY
KIND, EVEN IF SOLTEK COMPUTER INC. HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.

© Copyright 1999 Soltek Computer Inc. All right reserved
Web site: http://www.soltek.com.tw
email:

[email protected]

Edition:

March1999

Version:

1.0

SL-65GS/ 65GS8 SERIALS

1
2
3
...
»

Содержание SL-65GS






















































Отзывы:

Нет отзывов