SOLTEK SL-65DV2 Скачать руководство пользователя страница 7

7

65DVB/65DV2

memory modules with 66MHz Celeron or use of PC133 with 100MHz
Pentium III.

• DRAM interface may be slower than CPU by 33 MHz to allow use of older

memory modules with newer CPUs (e.g., PC66 memory modules with
100 MHz Pentium III).

1-5 FULL FEATURED ACCELERATED GRAPHICS PORT

      (AGP) CONTROLLER

• AGP v2.0 compliant
• Supports Sideband Addressing (SBA) mode (non-multiplexed address/

data)

• Supports 133MHz 2x mode for AD and SBA signaling
• Pipelined split-transaction long-burst transfers up to 533 MB/sec

1-6 MULTI-I/O FUNCTION

• Two Ultra DMA-33 / 66 Master Mode PCI EIDE ports (for 65DVB only).
• Two Ultra DMA-33 / 66 / 100 Master Mode PCI EIDE ports (for 65DV2

only).

• Two UART’s for Complete Serial Ports.
• One dedicated IR connector:
  

 Third serial port dedicated to IR function either through the two complete serial

    ports or the third dedicated port Infrared-IrDA (HPSIR) and ASK (Amplitude Shift
    Keyed) IR.

• Multi-mode parallel connector:
  Standard mode, ECP and EPP support.
• Floppy Disk connector:
  Two FDDs with drive swap support .
• Universal Serial Bus connector:
 

  --- USB v1.1 and Intel Universal HCI v1.1 compatible.

   --- Provides 2 build-in USB ports (another 2 internal USB ports for extensible
        purpose require an optional USB connect cable).

• PS/2 Keyboard connector.
• PS/2 Mouse connector.

1-7 EXTENSION SLOTS

• Five PCI bus Mater slots.
• One ISA slot.
• One AMR slot.

Содержание SL-65DV2









































































Отзывы: