SOLTEK SL-65DV2, Руководство пользователя, Страница: 21 / 72

21
65DVB/65DV2
Clear CMOS Data
Retain Data (default)
JBAT1: CLEAR CMOS DATA
JBAT1
1 3
JBAT1
1 3
A battery must be used to retain the motherboard configuration in
CMOS RAM.
NOTE : You can clear CMOS by shorting 2-3 pin when the system is
POWER OFF. Then, return to 1-2 pin position (default). It may
damage the motherboard if clearing the CMOS in POWER ON
status. Unplug the power cord from power supply before
clearing CMOS will be a best bet for user.
2-5.7 CLEAR CMOS DATA (JBAT1)
Connect the Wake On LAN signal from LAN card
to WOL1
WOL1 : WAKE ON LAN (WOL) FUNCTION
WOL1
GND
+5V standby
PME
This connector connects to a LAN card with a Wake On LAN output. The
connector powers up the system when a wake-up packet or signal is received
through the LAN card.
This feature requires that Wake On LAN feature is enabled at the BIOS
“
Power Management Setup ” and that your system has an ATX power supply with
at least 720mA / +5V standby power.
2-5.8 WAKE ON LAN FUNCTION (WOL1)