SOLTEK SL-65DV2 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 72

SOLTEK SL-65DV2 Скачать руководство пользователя страница 19

19

65DVB/65DV2

2-5 JUMPER DEFINITION

• The figure below shows the location of the motherboard’s jumper blocks.

CAUTION

• Do not move the jumper with the power on. Always turn off the power and unplug

the power cord from the computer before changing the jumper. Otherwise, the
motherboard could be damaged.

Those connectors support processor/system cooling fan with +12V. Those support
three pin head connector. When connecting the wire to FAN connectors, user should
give attention that the red wire is the positive and should be connected to the
+12V, the black wire is Ground and should be connected to GND. If your
motherboard has Hardware Monitor chipset on-board, you must use a specially
designed fan with speed sensor to take advantage of this function.
For fans with fan speed sensor, every rotation of the fan will send out 2 pulses.
System Hardware Monitor will count and report the fan rotation speed.

NOTE 1: Always consult vendor for proper CPU cooling fan.
NOTE 2: CPU FAN supports the FAN control. You can install PC Alert utility.

This will automatically control the CPU FAN speed according to the
actual CPU temperature.

GND
+12V
SENSOR

CPU FAN

FAN1 / FAN2: ONBOARD FAN CONNECTOR (12V)

FAN2

FAN1

SYSTEM FAN

2-5.1 ONBOARD FAN CONNECTOR (FAN1/FAN2)

2-5.2 USB PORT SELECT-1 (JP3/JP4)

Redirect USB port 3 to USB 2
connector (default)

JP3/JP4: USB PORT SELECT (1)

1 3

1 3

JP3
JP4

1 3

1 3

JP3
JP4

Redirect USB port 3 to AMR

«
...
17
18
19
20
21
...
»

Содержание SL-65DV2









































































Отзывы:

Нет отзывов