34
Video Off Method
This determines the manner in which the monitor is
blanked.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and
write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Select this option if your monitor supports the
Display Power Management Signaling (DPMS)
standard of the Video Electronics Standards to
select video power management values.
Video Off After
Choose NA, Suspend, Standby(default), or Doze.
MODEM Use IRQ
This determines the IRQ in which the MODEM can
use. The choices: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-Off by
Pressing the power button for more than 4 seconds
PWR-BTTN
forces the system to enter the Soft-Off state when the
system has “hung”. The choices: Delay 4 Sec,
Instant-Off.
Doze Mode
When enabled and after the set time of system
inactivity, the CPU clock will run at slower speed while
all other devices still operate at full speed.
Suspend Mode
When enabled and after the set time of system
inactivity, all devices except the CPU will be shut off.
HDD Power Down
When enabled and after the set time of system
inactivity, the hard disk drive will be powered down
while all other devices remain active.
PM Events
PM events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode.
In effect, the system remains alert for anything which occurs to a device which
is configured as On, even when the system is in a power down mode.
VGA
When Enabled, your can set the LAN awakens the
system.
LPT & COM
When On of LPT & COM, any activity from one of the